Westbay Smart 7'' LCD 4G Wireless GPS Remote Monitor Seat Occupancy Wireless Detection Passenger counting Seatbelt Alarm Reminder Alert System For Car Bus Truck Van Taxi Airplane Boat Vehicles

Westbay Intelligent safety belt reminder system: this system is composed of safety reminder host, seat detection terminal, safety belt socket and seat sensor, handheld pad, background system and vehicle audio system.

The detection terminal detects the state change of the seat sensor, detects whether someone is sitting down, packages the detection results, and sends them to the host for centralized processing through wireless signals at regular intervals. A seat detection terminal can detect the seating status of four seats.  It is widely used in statistics of passenger vehicle sitting rate.

When the pressure is detected on the seat, the sensor will send a signal to the seat detection terminal, which wirelessly transmits the signal to the reminder host, handheld pad and cloud terminal. At the same time, it will send an audible and visual reminder to inform passengers to fasten their seat belts.

4G Function:

Install the SIM card as picture, it will provide 4G signal to send the seat data to background system.

As shown in picture, the seat detection terminal and the reminder host transmit wirelessly without wiring, efficient and energy-saving algorithm, the battery can be used for more than 3 years, simple installation design, and the seat detection terminal can be connected with 2 seat belt sockets and 2 seat sensors; The equipment serial number is marked on it, and there is a signal line identification prompt on the front.

(1) Communication frequency band: Sub-1G;
(2) Communication distance: 60 meters(spacious space);
(3) Power supply: replaceable battery,battery life:3 years;
(4) Dimension: 73mm×65mm×24mm
(5) Installation method: screw or cable tie.
(6) Supply voltage: 3.6V
(7) Lead length: 100mm

 As shown in picture, an electronic detection device is built into the safety belt socket to detect whether the safety belt is buckled; The seat sensor detects whether someone is sitting on the seat through weight monitoring, and reports the detection results to the safety reminder host through the seat detection terminal.

(1)Detection method: bayonet contact type;
(2)Dimension: 145mm*48mm*2.8mm;
(3)Color:black
(4)Insert specification: 21.5mm
(5)Installation method: screw fixed installation,aperture 12.05mm.

 4. Handheld pad

 The handheld pad has special wireless communication function, which can be used by installation and maintenance personnel for input configuration, acceptance and rapid problem location and search. And can interact with server data through 4G.

5. Installation

Install the sensor and buckle according to the printed seat layout.

Red color wire is one group for sensor and buckle, blue color wire is the other group for sensor and buckle.

1. Login interface

As shown in picture, the system administrator logs in by entering the account and password to remind the system to view the data. People without permission cannot view the data, so as to better keep the information confidential.

2. Monitoring center

It can remotely monitor the passenger flow and time table of the vehicle, and remotely monitor the passenger flow and time table of the vehicle.

"History Track" and "History seat" can live tracking the vehicle driving route and seat occupancy status and seatbelt fasten status during the period selected.

Seat occupancy tracking data can be download from background system for data analysis, can tracking 30 days data.

3. System interface

The system interface can set account management, vehicle management, etc. Account management can set account authority to facilitate different people to manage their own vehicles; Vehicle management can enter new vehicle information for configuration, classification, management, etc.

 Through the operation of the system interface, you can view the use of each vehicle equipment and realize scientific management for passenger transport enterprises.

7. Remote Configuration

In case the seat layout need modification, we support remote re-configure the seat layout.  steps as below:

1. RD enginner reconfigure the seat layout and send the data package to user.
2. User download the data package and install the "seatbelt host software" and configuration drive "CP2102 Drive" in local computer.
3. Connect Configure cable to the display screen
4. Connect the USB terminal of the configuration cable to the computer,
5. Connect the power to the display screen
6. Open the configuration software to reconfigure, it takes about 2 minutes to finish.